top of page

EU CBAM for Cement Importers 2026–2027: Compliance, Carbon Costs and the First Certificate Surrender

Writer: CBAM Research Team
CBAM Research Team
Oct 12
25 min read

CBAM Journal Research & Intelligence Team, Sekason Research Limited. Published October 2026.

Data verified: 12 October 2026 · Next review trigger: 15 October 2026 CBAM Implementation Dialogue


Disclaimer

CBAM Journal reports are research and do not constitute legal, financial or regulatory advice. Readers should confirm obligations against the Official Journal and the Commission's CBAM pages and take advice for their own circumstances. Read fill disclaimer: https://www.cbamjournal.com/disclaimer


CBAM Journal title slide: EU CBAM for Cement Importers 2026–2027, compliance and first certificate surrender, dated 30 Sep.

1. Executive Summary

The first EU CBAM declaration and certificate surrender for goods imported in 2026 fall due on 30 September 2027 (Articles 6(1) and 22(1) of Regulation (EU) 2023/956, as replaced by Regulation (EU) 2025/2083). The 50-tonne threshold in Article 2a decides which EU CBAM cement importers carry that obligation, and the Commission published the Q3 2026 certificate price of €82.32 on 5 October 2026. TurkCimento, the Turkish Cement Manufacturers' Association, reports member data of 0.88 tCO2/t for grey clinker against 1.551 tCO2/t for the default applied to Türkiye (trade-body figures).


The report tests scope, evidence and cash against the 30 September 2027 date. It separates binding law from non-binding Commission guidance and from proposals still under negotiation, corrects the 31 May deadline that older material still quotes, and states what could not be verified.


Five things to do before 30 September 2027 (planning dates are editorial targets, not legal deadlines)

  • Track net mass of all CBAM goods against the 50-tonne threshold and hold authorised declarant status before importing.

  • Send each supplier the data request in Section 7.2 by 1 January 2027.

  • Record the actual or default route per supplier; the cement default mark-up rises from 10% to 20% on 1 January 2027.

  • Budget certificates on a price range and provision cash before sales open on 1 February 2027.

  • Complete the 2026 import ledger and evidence file before the declaration and surrender on 30 September 2027.


Status. In force as at October 2026: Regulation (EU) 2023/956 as amended, and Implementing Regulations (EU) 2025/2546, 2025/2547, 2025/2548, 2025/2620 and 2026/1740. Not law: COM(2025) 989, COM(2025) 990 and the Article 27a proposal. Scheduled and not yet held: the 15 October 2026 Implementation Dialogue.


2. Regulatory Context


2.1 Which instrument governs what

  • FINDING: Implementing Regulation (EU) 2026/1740, adopted 20 July 2026, corrects Annexes I and IV of Implementing Regulation (EU) 2025/2621, applies from 1 January 2026, and sets the EU CBAM default mark-up for cement at 10% for 2026, as at October 2026.

  • SO WHAT: A default value taken from the uncorrected Annex puts the 2026 declaration on the wrong embedded-emissions figure, and the cost follows it.

  • NOW WHAT: Re-read the corrected Annex I row for every CN code and origin you import by 1 February 2027, when certificate sales open.


Regulation (EU) 2023/956, consolidated on 20 October 2025 and amended by Regulation (EU) 2025/2083, is the base instrument of EU CBAM as at October 2026. Implementing Regulation (EU) 2025/2621 is the base default-values act, and Implementing Regulation (EU) 2026/1740 corrects it. UK CBAM is a separate regime that GOV.UK states will commence on 1 January 2027, and this report covers EU CBAM only.


Table T1. Instrument map for EU CBAM cement imports; all in force. Source: EUR-Lex. As at October 2026.

Instrument

Governs

Regulation (EU) 2023/956 as amended by 2025/2083

Scope, threshold, declarant, declaration, surrender, penalties

Implementing Regulation (EU) 2025/486

Authorised declarant procedure

Implementing Regulations (EU) 2025/2546, 2025/2547

Verification; calculation of embedded emissions

Implementing Regulations (EU) 2025/2548, 2025/2620

Certificate price; free-allocation adjustment

Implementing Regulation (EU) 2025/2621, corrected by 2026/1740

Default values


2.2 What the 2025 amendment changed

  • FINDING: Articles 6(1) and 22(1) of Regulation (EU) 2023/956, as replaced by Regulation (EU) 2025/2083, set the first EU CBAM declaration and surrender for 30 September 2027 for 2026 imports, replacing the original 31 May date, as at October 2026.

  • SO WHAT: A calendar or contract clause built on 31 May misstates the EU CBAM deadline by four months.

  • NOW WHAT: Replace 31 May with 30 September 2027 in every procedure, supplier contract and budget calendar by 1 January 2027.


Regulation (EU) 2025/2083 also inserted Article 2a, which sets a single threshold of 50 tonnes of net mass, and Article 17(7a), under which an applicant that applied for authorised declarant status by 31 March 2026 may continue importing provisionally, as at October 2026.


Table T2. Superseded and current EU CBAM text. Source: Regulation (EU) 2023/956 original and consolidated; Regulation (EU) 2025/2083; Mayer Brown (law firm). As at October 2026.

Topic

Earlier position

Current position

Basis

First declaration and surrender

31 May (original 2023 text)

30 September, first in 2027 for 2026

Articles 6(1), 22(1) as replaced

Certificates held from 2027

80% of embedded emissions, as reported by Mayer Brown

At least 50% since the start of the calendar year

Article 22(2) as replaced

2.3 Law, guidance and discussion

  • FINDING: The only Commission guidance addressed to importers is dated 30 May 2024, before Regulation (EU) 2025/2083 moved the first EU CBAM declaration to 30 September 2027, while the 14 August 2026 guidance set, including No. 5a on cement, addresses producers outside the EU, as at October 2026.

  • SO WHAT: Importers who cite 2024 guidance for 2027 deadlines, or cite producer guidance as law, carry interpretive risk without legal cover, because Guidance 5a states it is not legally binding.

  • NOW WHAT: Cite the Regulation for every obligation and use the producer guidance only as a checklist for the supplier data request issued by 1 January 2027.


Guidance No. 5a states:

"This guidance document is not legally binding and it is of an explanatory nature."

The Commission's spreadsheet of default values (10 August 2026) is published for information only, as at October 2026.


Table T3. Register of law, guidance, proposals and scheduled events. Source: European Commission; EUR-Lex; Mayer Brown (law firm). As at October 2026.

Item

Type and status

Regulation (EU) 2023/956 as amended; Implementing Regulations

Binding law, in force

Guidance of 30 May 2024, 14 August 2026 and 24 August 2026

Not legally binding; the 2024 guidance predates Regulation (EU) 2025/2083

COM(2025) 989, COM(2025) 990, Article 27a

Proposals, not law

Implementation Dialogue

Scheduled for 15 October 2026; not held


3. Compliance Obligations


3.1 Scope: are you covered?

  • FINDING: Article 2a of Regulation (EU) 2023/956 sets a single EU CBAM threshold of 50 tonnes of net mass per importer per calendar year, aggregated across all CN codes, and excludes electricity and hydrogen from the exemption, as at October 2026.

  • SO WHAT: Above it, all EU CBAM obligations apply to all embedded emissions imported that year, and an importer above the threshold without authorised declarant status faces the Article 26 penalty on all of them, reduced where the threshold was exceeded by no more than 10% (Article 26(2a)).

  • NOW WHAT: Companies importing more than 50 tonnes of CBAM goods in a calendar year must apply for authorised declarant status through the CBAM registry before importing (Article 5(1)), so track cumulative net mass across all CBAM goods from now.


Article 2a provides:

"The single mass-based threshold referred to in Article 2a shall be set at 50 tonnes of net mass." It continues: "That threshold shall apply to the total net mass of goods under all CN codes aggregated per importer and per calendar year." It also states: "This Article shall not apply to imports of electricity or hydrogen."

The Commission reviews the threshold each 30 April, as at October 2026. Cement is covered by CN 2523 10 00, 2523 21 00, 2523 29 00, 2523 30 00 and 2523 90 00, plus calcined clay (Table T11).



Table T4. Scope decision tree. Source: Regulation (EU) 2023/956, Articles 2a, 5. As at October 2026.

Step

Question

If yes

If no

1

Is your total net mass across all CBAM goods, including the cement codes, above 50 tonnes in the calendar year?

All obligations apply; go to step 2

Within the exemption; keep tracking

2

Do you hold authorised declarant status?

Keep the registry reference on file

Apply through the CBAM registry before importing

3

Do you import electricity or hydrogen?

No exemption applies

Steps 1 and 2 govern


3.2 Authorised declarant status

  • FINDING: Article 26(2) of Regulation (EU) 2023/956 sets the EU CBAM penalty for a person who introduces goods without being an authorised declarant at an amount from three to five times the Article 26(1) penalty per certificate, and applicants who applied by 31 March 2026 may continue importing provisionally (Article 17(7a)), as at October 2026.

  • SO WHAT: One unauthorised import above the threshold exposes the business to a multiple of the base penalty on every certificate.

  • NOW WHAT: Confirm the registry authorisation, and any indirect customs representative's own status in writing (Article 5(1a)), by 1 January 2027.


Article 5(3) provides:

"The application for an authorisation shall be submitted via the CBAM registry established in accordance with Article 14."

Implementing Regulation (EU) 2025/486 requires the Commission to assess an application within 120 calendar days, as at October 2026, and the applicant must show sufficient financial standing.


1.  Confirm the authorisation reference in the CBAM registry.

2.  Confirm that any provisional importing rests on an application made by 31 March 2026.

3.  Obtain written confirmation that each indirect customs representative holds status, which Article 5(1a) requires even where the importer is exempt.


3.3 Embedded emissions: actual or default

  • FINDING: Defaults carry a mark-up of 10% for 2026, 20% for 2027 and 30% from 2028 for cement (Implementing Regulation (EU) 2026/1740), and Article 7(1) of Regulation (EU) 2023/956 requires EU CBAM embedded emissions to be calculated by the Annex IV methods, as at October 2026.

  • SO WHAT: Each year the default route costs more per tonne while the CBAM factor falls from 97.5% to 95%.

  • NOW WHAT: Record the route (actual or default) for each supplier and the date actual data must arrive by 1 January 2027, when the default mark-up rises to 20%.


Article 7(1) provides:

"Embedded emissions in goods shall be calculated pursuant to the methods set out in Annex IV."

Article 7(2) allows actual emissions under points 2 and 3 of Annex IV or default values under point 4.1. Commission guidance (non-binding) states that cement counts direct and indirect emissions. Implementing Regulation (EU) 2025/2547 places precursors, clinker and calcined clay where used, inside the system boundary, as at October 2026. The actual route needs the producer's verified installation data and carries no mark-up; the default route needs no producer data and carries the mark-up.


3.4 Verification

  • FINDING: Implementing Regulation (EU) 2025/2546, applying from 1 January 2026, sets EU CBAM verification materiality at 5% of total specific embedded emissions, as at October 2026.

  • SO WHAT: A supplier report that has not passed verification against that 5% limit cannot be treated as a verified report.

  • NOW WHAT: Under Article 10a(1) verifier registration requests were not allowed before 1 September 2026, so ask each supplier for its verifier's name and accreditation status by 1 January 2027.


Implementing Regulation (EU) 2025/2546 provides for site visits, physical or virtual, and for a verification report on the Commission template submitted through the CBAM registry.


3.5 The declaration and the registry

  • FINDING: Article 6(1) of Regulation (EU) 2023/956 requires each authorised declarant to submit the first annual EU CBAM declaration by 30 September 2027 for 2026 imports, through the CBAM registry, as at October 2026.

  • SO WHAT: The declaration states the quantity and total embedded emissions of each good imported, so any gap in the import ledger or supplier evidence appears in the submitted figures.

  • NOW WHAT: Complete the 2026 import ledger by CN code and origin by 1 February 2027.

  • The Commission states that a carbon price paid in a third country can be deducted if proven. The declaration contents beyond quantity and total embedded emissions are not covered in this report.


Table T5. Obligations matrix. Source: Regulation (EU) 2023/956 as amended. As at October 2026.

Obligation

Article

Deadline

Evidence to hold

Hold authorised declarant status

5

Before importing

Registry reference

Track the 50-tonne threshold

2a

Each calendar year

Net-mass tracker by CN code

Submit the declaration

6(1)

30 September 2027

2026 import ledger

Surrender certificates

22(1)

30 September 2027

Certificate account record


4. Key Dates and Deadlines


4.1 The timeline, October 2026 to 30 September 2027

  • FINDING: EU CBAM weekly certificate pricing starts 1 January 2027 (Implementing Regulation (EU) 2025/2548 Article 5(1)), certificate sales open on 1 February 2027 (Article 20(1) of Regulation (EU) 2023/956), and the first declaration and surrender fall on 30 September 2027, as at October 2026.

  • SO WHAT: Liability on 2026 imports already exists, yet no certificate can be bought before 1 February 2027, so finance must provision before purchasing opens.

  • NOW WHAT: Enter the dated steps in the finance calendar with named owners by 1 January 2027.


Table T6. EU CBAM timeline with basis tag. Source: Regulation (EU) 2023/956; Implementing Regulation (EU) 2025/2548; European Commission; Mayer Brown (law firm). As at October 2026.

Date

Event

Basis

15 October 2026

CBAM Implementation Dialogue; agenda unpublished

Scheduled

20 October and 30 November 2026

Trilogues on COM(2025) 989, as reported by Mayer Brown

Scheduled

1 January 2027

Weekly certificate price; cement default mark-up 20%; CBAM factor 95%

Law

4 January 2027

Q4 2026 price due for publication

Scheduled

1 February 2027

Member States sell certificates on the common central platform

Law

From 2027

Quarter-end holding of at least 50% of embedded emissions

Law

30 April 2027

Annual Commission review of the 50-tonne threshold

Law

30 September 2027

First declaration and first surrender, for 2026 imports

Law

4.2 The 2027 certificate sequence

  • FINDING: From 2027 Article 22(2) of Regulation (EU) 2023/956 requires the EU CBAM authorised declarant to hold certificates for at least 50% of the embedded emissions in goods imported since the start of the calendar year, as at October 2026.

  • SO WHAT: The holding test applies to 2027 imports on top of the surrender for 2026 imports due 30 September 2027, so cash is needed twice in 2027.

  • NOW WHAT: Model 2027 purchases on weekly prices from 1 February 2027.


Five steps set the 2027 sequence:

1.  In 2026 the Commission publishes four quarterly prices, one for each calendar quarter.

2.  From 1 January 2027 the Commission calculates the price every calendar week (Implementing Regulation (EU) 2025/2548 Article 5(1)).

3.  From 1 February 2027 Member States sell certificates on the common central platform.

4.  From 2027 the declarant holds certificates for at least 50% of embedded emissions imported since 1 January of that year.

5.  By 30 September 2027 the declarant surrenders certificates for 2026 imports.


5. Financial Exposure and Risk


5.1 How the obligation is built

  • FINDING: Implementing Regulation (EU) 2025/2620 sets the EU CBAM grey clinker benchmark at 0.666 tCO2e per tonne, and the CBAM factor under Article 10a(1a) of the ETS Directive (2003/87/EC) is 97.5% for 2026 and 95% for 2027, as at October 2026.

  • SO WHAT: The certificate obligation is gross embedded emissions less the free-allocation adjustment, so a budget built on gross emissions or on a shorthand percentage misstates cost.

  • NOW WHAT: Model gross, adjustment and net on separate lines per CN code and origin by 1 February 2027.


The "CBAM factor" in this report means the percentage in Article 10a(1a) of the ETS Directive: 97.5% in 2026. The shorthand "2.5% payable" is not in the instrument, which states 97.5% for 2026 and 95% for 2027. Implementing Regulation (EU) 2025/2620 states the adjustment as FAAg = SEFAg,y × Mg, where Mg is the mass imported in the declaration year, as at October 2026. Benchmarks are inputs: grey clinker 0.666, white clinker 0.859, and other Portland cement 0.000 under Column A (actual data) or 0.666 under Column B (default values).



Table T7. Build-up of the certificate obligation. Source: Regulation (EU) 2023/956; Implementing Regulations (EU) 2025/2620, 2026/1740. As at October 2026.

Step

Input

1

Embedded emissions per tonne, actual or default (Annex IV; Annex I of 2025/2621 as corrected), plus mark-up on defaults: 10% (2026), 20% (2027)

2

Gross emissions = mass × embedded emissions per tonne

3

Free-allocation adjustment, FAAg = SEFAg,y × Mg

4

Net certificates = gross less adjustment

5

Cost = net certificates × certificate price

5.2 Certificate price

  • FINDING: The Commission published the Q3 2026 EU CBAM certificate price of €82.32 on 5 October 2026, €7.04 (9.35%) above the Q2 price of €75.28 (CBAM Journal calculation), as at October 2026.

  • SO WHAT: One quarter moved the unit price by 9.35%, so a budget on one price point misstates cost.

  • NOW WHAT: Budget a range from €75.28 to €82.32, and re-run the model when the Q4 price is published on 4 January 2027.


The price is the weighted average of EU ETS auction clearing prices; the Commission publishes four quarterly prices in 2026 and weekly prices from 2027. CBAM Journal calculation: €82.32 less €75.28 is €7.04, and €7.04 divided by €75.28 is 9.35%. The trade-press ETS price in Section 5.3 (€88.70, January 2026) is a different series and is not interchangeable with the certificate price, as at October 2026.



Table T8. EU CBAM certificate price series. Source: European Commission, price of CBAM certificates. As at October 2026.

Quarter

Price

Published

Q1 2026

€75.36

7 April 2026

Q2 2026

€75.28

6 July 2026

Q3 2026

€82.32

5 October 2026

Q4 2026

Due

4 January 2027

From 2027

Weekly price

From 1 January 2027

5.3 The cost of defaults versus verified data

  • FINDING: Argus reported on 14 January 2026 that, at an EU ETS price of €88.70 per tonne, a verified clinker supplier at 0.82 tCO2/t carries about €15.14 per tonne under EU CBAM against about €77 per tonne on Ukraine's default.

  • SO WHAT: On that example the default route costs about five times as much per tonne (CBAM Journal calculation: €77 ÷ €15.14 = 5.1).

  • NOW WHAT: Rank suppliers by default exposure and request verified data from the largest-volume origins by 1 January 2027, when the cement mark-up rises to 20%.


Every figure in Table T9 is a trade-press or trade-body figure, not a Commission estimate, and Argus used the January 2026 ETS price rather than the prices in Table T8, as at October 2026.




Table T9. Verified against default cost per tonne, trade-press and trade-body figures. Source: Argus, 14 and 27 January 2026; World Cement, 25 March 2026. As at October 2026.

Item

Emissions (tCO2/t)

Cost per tonne

Source and date

Verified clinker supplier

0.82

About €15.14

Argus, 14 January 2026

Ukraine default

1.518

About €77

Argus, 14 January 2026

Egypt and Algeria defaults

1.419 and 1.430

About €68–69

Argus, 14 January 2026

Türkiye "other countries" default

1.584

Almost €83

Argus, 14 January 2026

Türkiye grey clinker, member data against default

0.88 against 1.551

About €20 rising to about €80

TurkCimento via World Cement, 25 March 2026

5.4 Penalty exposure

  • FINDING: Article 26(2) of Regulation (EU) 2023/956 sets the EU CBAM penalty for unauthorised importers at three to five times the Article 26(1) amount for each certificate, as at October 2026.

  • SO WHAT: Paying the penalty does not discharge the duty to surrender certificates (Article 26(3)), so the cost is the penalty plus the certificates.

  • NOW WHAT: Set the internal evidence sign-off date no later than 30 June 2027, one quarter before the 30 September 2027 surrender date.


Article 26(1) provides:

"Such a penalty shall apply for each CBAM certificate that the authorised CBAM declarant has not surrendered."

The Article 26(1) amount equals the EU ETS excess-emissions penalty under Article 16(3) of Directive 2003/87/EC, indexed under Article 16(4), for the year of importation, as at October 2026.



Table T10. EU CBAM penalty rules. Source: Regulation (EU) 2023/956, Article 26. As at October 2026.

Situation

Article

Amount rule and relief

Declarant fails to surrender by 30 September

26(1)

ETS excess-emissions penalty, indexed, per certificate; reduction where errors come from incorrect third-party information (26(1a))

Non-declarant introduces goods

26(2)

Three to five times the 26(1) amount per certificate; effective, proportionate, dissuasive

Importer above threshold, not a declarant

26(2a)

Penalty on all embedded emissions; reduction possible if threshold exceeded by no more than 10%

Penalty paid

26(3)

Does not release the duty to surrender


6. Sector-Specific Impact Analysis


6.1 Cement: scope, process and data

  • FINDING: EU CBAM covers five cement CN codes (2523 10 00, 2523 21 00, 2523 29 00, 2523 30 00, 2523 90 00) and calcined clay, and cement defaults carry a 10% mark-up for 2026 under Implementing Regulation (EU) 2026/1740, as at October 2026.

  • SO WHAT: Clinker content differs by product, so a supplier's product-level average does not support the declaration.

  • NOW WHAT: Request clinker emissions and clinker ratio per product line from each supplier by 1 January 2027.


Default rows in Annex I give direct, indirect and total emissions (tCO2e per tonne) per country and CN or TARIC code, with an "Other countries and territories" fallback. Commission guidance (non-binding) treats clinker, and calcined clay where used, as precursors; gypsum and mineral additives carry zero embedded emissions, as at October 2026.


Table T11. Cement CN codes and default structure. Source: Regulation (EU) 2023/956 Annex I; Implementing Regulation (EU) 2026/1740. As at October 2026.

CN code

Product

Precursor

2523 10 00

Clinker (TARIC white 10, grey 90)

None

2523 21 00, 2523 29 00, 2523 30 00, 2523 90 00

White Portland, other Portland, aluminous and other hydraulic cements (hydraulic: white 10, grey 90)

Clinker

ex 2507 00 80

Calcined clay (TARIC 2507 00 80 80)

None

6.2 Origin exposure

  • FINDING: Argus, citing Global Trade Tracker, reports EU-bound volumes in 2025 of 4.8 Mt from Türkiye, 1.6 Mt from Ukraine, 1.3 Mt from Egypt and 1.2 Mt from Algeria, as at October 2026.

  • SO WHAT: Türkiye is the largest origin, yet TurkCimento states that no country-specific EU CBAM default has been defined for it, so Turkish-sourced volumes carry the largest documented data uncertainty.

  • NOW WHAT: Map each origin to a published default or verified supplier data by 1 February 2027 and list any origin with neither.


TurkCimento reports Turkish cement exports of 15.009 Mt in 2025 and clinker exports of 6.939 Mt (ZKG, March 2026), and Turkish clinker exports to the EU in 2024 went mainly to Italy (0.906 Mt). On 4 March 2026 a Commission spokesperson told S&P Global that work continues with Turkish authorities to fill the data gaps for cement and clinker defaults, as at October 2026.


Table T12. Origin exposure. Source: Argus, 14 January 2026; trade-press figures. As at October 2026.

Origin

EU-bound volume, 2025

Default reported by Argus (tCO2/t)

Türkiye

4.8 Mt

1.584 ("other countries"); TurkCimento cites 1.551 for grey clinker

Ukraine

1.6 Mt

1.518

Egypt

1.3 Mt

1.419

Algeria

1.2 Mt

1.430

6.3 Other CBAM sectors

  • FINDING: The EU CBAM default mark-up is 10% in 2026 for cement, iron and steel, aluminium and hydrogen and 1% for fertilisers (Implementing Regulation (EU) 2026/1740), and hydrogen and electricity are excluded from the 50-tonne exemption, as at October 2026.

  • SO WHAT: Net mass in any CBAM good counts towards the same 50-tonne total, so a cement importer who also buys steel crosses the threshold sooner.

  • NOW WHAT: Companies importing more than 50 tonnes of all CBAM goods combined in a calendar year must hold authorised declarant status before importing, so add every CBAM good to the tracker by 1 January 2027.


Table T13. Mark-up and threshold by sector. Source: Implementing Regulation (EU) 2026/1740; Regulation (EU) 2023/956 Article 2a. As at October 2026.

Sector

Mark-up 2026

Mark-up 2027

Mark-up 2028 onwards

Within 50-tonne exemption

Cement

10%

20%

30%

Yes

Iron and steel

10%

20%

30%

Yes

Aluminium

10%

20%

30%

Yes

Hydrogen

10%

20%

30%

No

Fertilisers

1%

1%

1%

Yes


7. Practical Action Framework


7.1 The dated action plan

  • FINDING: The EU CBAM calendar under Implementing Regulation (EU) 2025/2548 and Articles 20(1) and 22(1) of Regulation (EU) 2023/956 runs from the Q4 price on 4 January 2027, through certificate sales on 1 February 2027, to the declaration and surrender on 30 September 2027, as at October 2026.

  • SO WHAT: Supplier-dependent tasks (data, verification) have the longest lead time and set the critical path.

  • NOW WHAT: Issue the supplier data request by 1 January 2027.


Table T14. Dated action plan. Planning dates marked "target" are editorial targets anchored to regulatory dates. As at October 2026.

Task

Owner role

Date

Evidence file

Review outputs of the Implementation Dialogue

Compliance Manager

15 October 2026

Dated note

Confirm declarant and representative status; record route per supplier; issue supplier request (Table T15)

Compliance Manager, procurement lead

1 January 2027 (target)

Registry reference; route register; request

Re-run the cost model on the Q4 price

Finance lead

4 January 2027

Model version and price

Provision cash; complete the 2026 import ledger

CFO; customs lead

1 February 2027

Approved provision; reconciled ledger

Sign off the evidence file

Compliance Manager

30 June 2027 (target)

Signed checklist

Submit declaration and surrender certificates

Compliance Manager, CFO

30 September 2027

Registry confirmations


7.2 The supplier evidence request

  • FINDING: Implementing Regulation (EU) 2025/2547, applying to 2026 imports, sets how EU CBAM embedded emissions are calculated, and Commission guidance No. 5a, published 14 August 2026, sets out the data a producer holds, as at October 2026.

  • SO WHAT: The importer cannot prepare the declaration due 30 September 2027 without data that sits with the producer.

  • NOW WHAT: Send the request and make delivery a contract term by 1 January 2027.

  • Request the five items in Table T15 from each non-EU clinker or cement supplier, returned by 1 February 2027 (editorial target). Guidance No. 5a is non-binding.


Table T15. Supplier evidence request. Source: Implementing Regulations (EU) 2025/2546, 2025/2547; Commission Guidance No. 5a. As at October 2026.

Field

Reason

Instrument

Clinker and cement-level emissions

Basis of the actual route

Implementing Regulation (EU) 2025/2547

Electricity-related indirect emissions

Indirect emissions count for cement

Guidance No. 5a (non-binding)

Embedded emissions of clinker and, if used, calcined clay

Precursors sit inside the system boundary

Implementing Regulation (EU) 2025/2547

Verified report

Actual data rests on verification

Implementing Regulation (EU) 2025/2546

Verifier accreditation

Identifies who verified the report

Implementing Regulation (EU) 2025/2546

7.3 The actual-versus-default decision rule

  • FINDING: Defaults carry a mark-up of 10% in 2026 and 20% in 2027 under Implementing Regulation (EU) 2026/1740 for EU CBAM cement, as at October 2026.

  • SO WHAT: The default premium recurs on every shipment and the mark-up doubles on 1 January 2027, so the price of verification is weighed against a cost that rises.

  • NOW WHAT: Choose the route per supplier by 1 January 2027, when the 20% mark-up applies.


The rule: choose the verified route where (default total × (1 + mark-up) − verified value) × tonnes × certificate price exceeds the buyer's all-in cost of obtaining verified data.

For clinker the benchmark is 0.666 in both Column A and Column B; for other Portland cement (2523 29 00) it is 0.000 under Column A and 0.666 under Column B, so check the column for each CN code first, as at October 2026. Inputs: default total from Annex I as corrected; mark-up 10% (2026) or 20% (2027); verified value from the supplier's report; own tonnes; certificate price €75.28 to €82.32 (Table T8); and the buyer's verifier quote: ____________.


7.4 Worked example

  • FINDING: The Commission's Q3 2026 EU CBAM certificate price is €82.32 (published 5 October 2026) and Implementing Regulation (EU) 2025/2620 sets the grey clinker benchmark at 0.666 tCO2e per tonne, as at October 2026.

  • SO WHAT: The example shows gross emissions, the free-allocation adjustment, net certificates and cost on both routes.

  • NOW WHAT: Replace the Illustrative inputs with your own volumes and supplier values before 1 February 2027.


An Italy-based importer and authorised declarant buys 10,000 tonnes of grey clinker (CN 2523 10 00, TARIC 2523 10 00 90) in 2026. The origin is not named. The default row used is the Argentina "other clinker" row, shown only to illustrate the format; it is not a realistic origin and not a Türkiye value. Sourced figures and Illustrative assumptions are listed separately.


Table T16. Inputs. Source as shown. As at October 2026.

Input

Value

Source

Label

Mass

10,000 t

None

Illustrative

Default total, CN 2523 10 00 90

0.900 tCO2e/t (0.870 direct + 0.030 indirect)

Annex I, Implementing Regulation (EU) 2025/2621 as corrected by 2026/1740

Sourced; format illustration

Default mark-up

10% (2026); 20% (2027)

Implementing Regulation (EU) 2026/1740

Sourced

Verified value

0.88 tCO2/t

TurkCimento member data, World Cement, 25 March 2026

Sourced figure, used as an Illustrative supplier value

Benchmark; CBAM factor

0.666 tCO2e/t; 97.5% (2026), 95% (2027)

Implementing Regulation (EU) 2025/2620; ETS Directive Article 10a(1a)

Sourced

Adjustment per tonne

0.649 (2026); 0.633 (2027): benchmark × factor, same on both routes

None

Illustrative

Certificate price

€75.36; €75.28; €82.32; for 2027, €82.32 as a stand-in for the weekly price

European Commission price page

Sourced; choosing one is Illustrative

Table T17. Results, 2026, in tCO2e and euros. CBAM Journal calculation. As at October 2026.

Line

Default route

Verified route

Difference

Gross emissions (10,000 × 0.900 × 1.10; 10,000 × 0.88)

9,900

8,800

1,100

Free-allocation adjustment

6,493.5

6,493.5

0

Net certificates

3,406.5

2,306.5

1,100

Cost at €75.36

€256,713.84

€173,817.84

€82,896.00

Cost at €75.28

€256,441.32

€173,633.32

€82,808.00

Cost at €82.32

€280,423.08

€189,871.08

€90,552.00

Table T18. 2027 variant, mark-up 20%, CBAM factor 95%, price €82.32. CBAM Journal calculation. As at October 2026.

Line

Default route

Verified route

Difference

Gross emissions

10,800

8,800

2,000

Free-allocation adjustment

6,327

6,327

0

Net certificates

4,473

2,473

2,000

Cost at €82.32

€368,217.36

€203,577.36

€164,640.00


From 2026 to 2027 the default-route cost rises by €87,794.28 at €82.32 (CBAM Journal calculation: €368,217.36 less €280,423.08), while the verified-route cost rises by €13,706.28, the effect of the lower CBAM factor alone. The default row here is close to the verified value; Table T9 shows the wider gaps reported for real origins.


7.5 The evidence file and records

  • FINDING: Article 6(1) of Regulation (EU) 2023/956 requires the first EU CBAM declaration by 30 September 2027, so evidence for every 2026 import must exist by then, as at October 2026.

  • SO WHAT: A declaration without traceable evidence for each import leaves the business unable to substantiate its figures if queried.

  • NOW WHAT: Open the evidence file for 2026 imports by 1 January 2027.


Checklist for each import:

•  Customs import declaration, by CN code and origin.

•  Supplier data return, verified report and verifier accreditation, where the actual route is used.

•  Default-value row used, with the version of the Annex.

•  Route register entry, certificate price used and its publication date.

•  Certificate account records, registry authorisation reference and surrender confirmation.


8. Strategic Outlook


8.1 What is not law yet

  • FINDING: Parliament adopted its mandate on COM(2025) 989 on 15 September 2026 by 464 votes to 50 with 159 abstentions, the Council mandate dates from 12 June 2026, and trilogues are scheduled for 20 October and 30 November 2026, as at October 2026.

  • SO WHAT: None of these measures is law, so a 2027 plan built on them risks rework.

  • NOW WHAT: Re-check status on EUR-Lex and the Commission's CBAM legislation page before 20 October 2026 and again after 30 November 2026.


The Commission has proposed, in COM(2025) 989, a downstream extension of EU CBAM and anti-circumvention provisions. Renewable Matter reports the Parliament vote (16 September 2026); Mayer Brown, a law firm, reports the Council mandate and the trilogue dates. The Commission has also proposed a Temporary Decarbonisation Fund (COM(2025) 990) and an Article 27a temporary exemption, which the Council kept in reworked form and Parliament deleted; neither is law. The Commission consultation on technical rules for buying certificates closed on 6 August 2026. The 15 October 2026 Implementation Dialogue has not taken place as at October 2026, and its agenda is unpublished. Table T3 holds the register.


8.2 The 2027–2034 trajectory

  • FINDING: The CBAM factor under Article 10a(1a) of the ETS Directive falls from 97.5% in 2026 to 95% in 2027, 90% in 2028 and 14% in 2033, with none from 2034, as at October 2026.

  • SO WHAT: Each year the free-allocation offset shrinks and the cement default mark-up rises from 10% to 30% by 2028, so the default route costs more.

  • NOW WHAT: Secure supplier data by 1 January 2027, when the mark-up is 20% and the factor 95%.


Implementing Regulation (EU) 2025/2547 Article 11(5) provides for a review of default values by December 2027 at the latest, and the Commission reviews the 50-tonne threshold each 30 April, as at October 2026.



Table T19. Cement default mark-up and CBAM factor, 2026–2034. Source: Implementing Regulation (EU) 2026/1740; Directive 2003/87/EC Article 10a(1a). As at October 2026.

Year

Cement default mark-up

CBAM factor

2026

10%

97.5%

2027

20%

95%

2028

30%

90%

2029

30%

77.5%

2030

30%

51.5%

2031

30%

39%

2032

30%

26.5%

2033

30%

14%

2034

30%

None

Compliance Managers should issue the supplier data request by 1 January 2027 (editorial target), before the cement default mark-up rises to 20% on that date and before certificate sales open on 1 February 2027.


9. FAQ Section


Do I need to register as an authorised CBAM declarant to import cement, and what if I import under 50 tonnes a year?

Yes, if your imports of all CBAM goods exceed 50 tonnes of net mass in a calendar year. Article 2a of Regulation (EU) 2023/956 exempts importers up to that threshold, and Article 5 requires an importer above it to apply through the CBAM registry before importing. Article 26(2) sets the EU CBAM penalty for introducing goods without status at three to five times the Article 26(1) amount per certificate.


When is the first CBAM declaration and certificate surrender due for cement I imported in 2026?

30 September 2027. Articles 6(1) and 22(1) of Regulation (EU) 2023/956, as replaced by Regulation (EU) 2025/2083, set that date for the first EU CBAM declaration and surrender, covering goods imported in 2026. The original 31 May date is superseded. Member States sell certificates from 1 February 2027 under Article 20(1).


Which default emissions value applies to my cement or clinker supplier, and what changed in July 2026?

The row in Annex I of Implementing Regulation (EU) 2025/2621, as corrected by Implementing Regulation (EU) 2026/1740, for your supplier's country and CN or TARIC code, with an "Other countries and territories" row where a country is not listed. The July 2026 correction replaced Annexes I and IV, split clinker and hydraulic cement into white and grey codes, and applies from 1 January 2026. A mark-up of 10% in 2026 and 20% in 2027 applies to EU CBAM defaults.


How is my CBAM certificate obligation for cement calculated after free allocation?

Gross embedded emissions less the free-allocation adjustment give the certificates to surrender. Implementing Regulation (EU) 2025/2620 states the adjustment as FAAg = SEFAg,y × Mg, with a grey clinker benchmark of 0.666 tCO2e per tonne and a CBAM factor under Article 10a(1a) of the ETS Directive of 97.5% in 2026 and 95% in 2027. Keep gross, adjustment and net on separate lines under EU CBAM.


What happens if my supplier cannot give me verified emissions data?

The alternative under Article 7(2) of Regulation (EU) 2023/956 applies: embedded emissions are set by reference to default values under point 4.1 of Annex IV, instead of actual emissions. Under EU CBAM the cement default carries a mark-up of 10% in 2026 and 20% in 2027. Verification of actual data follows Implementing Regulation (EU) 2025/2546, which applies from 1 January 2026.


What is the penalty if I am late or short on certificates, or if I am not an authorised declarant?

A penalty applies for each certificate not surrendered by 30 September. Article 26(1) of Regulation (EU) 2023/956 sets it at the EU ETS excess-emissions penalty, indexed, for the year of importation. A person who is not an authorised declarant and introduces goods faces three to five times that amount per certificate under Article 26(2), and paying does not release the duty to surrender (Article 26(3)).


10. References and Sources

Research Limitations

The figures in this report rest on the Official Journal texts and Commission pages available on 12 October 2026, subject to the following limits. The full operative wording of several articles of Regulation (EU) 2023/956 was not reproduced, so only the sentences quoted above appear in quotation marks and article numbers should be re-checked on EUR-Lex. Annex-level provisions for some goods were not read in full. The Annex I default rows for India and for countries not read were not reviewed, and the two reported Türkiye figures (1.551 and 1.584 tCO2/t) differ by date and product and are not reconciled. No Commission cost estimate for cement exists in the sources reviewed, and every per-tonne cost figure is a trade-press or trade-body statement resting on January 2026 or earlier ETS prices. The indexed 2026 euro penalty amount, the rule for importers that missed the 31 March 2026 application date, which certificate price applies to 2026 imports at surrender, the first quarter-end date for the 50% holding test and the record-retention period were not found in a primary source. The duty to obtain verification was not located in the verification regulation. Two cases were documented, both Turkish. No Indian cement exporter, no India-to-EU cement tonnage, no EU importer case and no Commission or Cembureau statement within the last 12 months were found. The status of proposals was taken from the Commission's legislation page and press reports. The worked example uses an illustrative default row and an illustrative adjustment per tonne. No liability figure in this report is an official figure.


Sources Used in This Report

Sources cited in this report. Trade-press, law-firm and press sources are labelled. Information current as at October 2026.


© 2026 Sekason Research Limited, London. All rights reserved. For information only; not legal or tax advice.

bottom of page